Siser HTV Application Instructions
EasyWeed®, EasyWeed® Extra, EasyWeed® Electric, EasyWeed® Glow
Application Instructions (Heat Press) *Recommended:
Cutting: Cut in reverse and weed excess material
Temperature: 305°F / 150°C
Pressure: Medium
Preheating: Preheat garment for 2-3 seconds
Time: 10-15 seconds
Pressing: Cover design with teflon sheet or non stick parchment paper. (If layering, tack first layer for 1-2 seconds, peel carrier sheet, apply next layer, repeat. Press last layer for full 10-15 seconds)
Application Instructions (Home Iron)*:
Cutting: Cut in reverse and weed excess material
Temperature: Set iron dial between Cotton and Linen
Pressure: Press iron with medium/firm pressure.
Time: 10-15 seconds (If areas lift after application, cover and press for 5-10 seconds)
Pressing:
Place on flat, hard surface (ironing board not recommended). Cover design with teflon sheet or non stick parchment paper. (If layering, tack first layer for 1-2 seconds, peel carrier sheet, apply next layer, repeat. Press last layer for full 10-15 seconds)
Care Instructions
- Wait 24 hours before first wash
- Machine wash warm or cold with mild detergent
- Do not bleach or dry clean
- Dry on normal dryer setting
Storage
Store in a cool and dry area. Keep away from direct heat, sunlight and humidity.
* Due to variances with home iron application and heat, heat press is recommended and home iron application can't be guaranteed.
**Due to variances in the manufacturing process of fabrics, Siser highly recommends testing prior to production.